Precautions for using floor standing advertising displays
1.On/off key: "I" turns on the power, "O" turns off the power. After powering on, the system will automatically start playing the material, and the power-on response time is about 10S.
2. The floor standing advertising display needs to be placed and installed in a ventilated, dry, and flat ground environment. This product cannot be used in or near water.
3. The power supply voltage of the equipment is stable. Do not allow the power supply voltage to fluctuate.
4. There are: power socket, power on/off button, USB socket, network cable socket at the bottom of the back of the device, and it is equipped with a shielding plate. When turning on the device, loosen the screws on both sides of the shielding plate and open it. You can see the power-off button through the shield. After turning on the device, close the shield and tighten the two fixing screws to prevent children from touching it and causing danger.
5. If there is dust and dirt, turn off the floor standing advertising display and unplug the power plug for ten minutes, then wring it out with a damp cloth and wipe it off. The floor standing advertising display can be wiped gently with a clean soft cloth. Do not use chemical reagents to wipe it. Solvents may deteriorate the casing and damage its paint surface.
6. If the advertising machine is not used for a long time, turn off the power of the product and unplug the power plug.
