Installation method of elevator advertising machine
Installation method of elevator advertising machine
1. Try to install a single machine in the elevator car, which is more convenient for advertising replacement. The network version is prone to instability and will affect the effect. Outside the elevator, both the network version and the stand-alone version are fine, but the network version is relatively more convenient for publishing advertisements.
2. In some communities, screws are not allowed to be driven into the walls of the elevator or elevator entrance. In this case, you can wipe the wall clean, then stick the double-sided tape on the backboard and then stick the backboard on the wall, and then fix it with glass glue in the center square and four sides. When fixing, you must ensure the balance of the backboard of the elevator advertising machine. After waiting for the glass glue to completely solidify, connect the power cord of the elevator advertising machine. After the backboard is fixed, the power cord is introduced from the opening of the backboard, or from the openings on the four sides above the backboard.
3. Generally, the stand-alone advertising machine is installed in the car, which has its own playback system and a built-in speaker. When changing, use a USB flash drive to change the content; the most needed thing in the elevator car is power supply, and a socket is reserved in the car.