What should I pay attention to when installing the curved splicing screen
The number of splicing of curved splicing screens cannot be too small, and should be controlled at least to more than 5 columns. Why is this requirement required? Because only in this way can the display effect of the curved surface be guaranteed, otherwise it is difficult to achieve. In principle, the more splicing numbers, the more obvious the effect.
The installation should be designed in conjunction with the design. The installation of the LCD splicing screen is an extremely important part, and this is even more prominent in the curved LCD splicing screen. For example, if the cabinet type is installed, the size change caused by the arc and the position of the crossbar must be accurately calculated. If the aluminum profile type is used, it will be more complicated. The technicians must accurately adjust the subtle changes caused by the entire arc, including the angle code and the spacing between the horizontal and vertical beams.
The size of the installation space should also be considered. Due to the curved design, the back of the entire spliced screen must be narrow in the middle and wide on both sides. For this reason, our installation space must be large enough, otherwise it may lead to installation failure.
