Do you know the environmental requirements for splicing screen installation?
Do you know the environmental requirements for splicing screen installation?
1. Selection of the installation floor: The installation floor of the LCD splicing screen should be flat, because the entire system of the LCD splicing screen is relatively large in terms of volume and weight, and the selected floor also needs to have a certain ability to bear the weight. If If there are tiles on the ground, it may not be able to withstand its weight. Another point is that the ground of the installation should be anti-static.
2. Precautions for wiring: When installing the LCD video wall, pay attention to distinguish its power line and signal line when wiring, and install it in different places to prevent interference. In addition, according to the size of the screen and the installation position of the entire project, the length and specifications of the various lines required are calculated, and the needs of the entire project are calculated.
3. Ambient light requirements: Although the brightness of the LCD splicing screen is very high, it is still limited after all, so the light around the environment where the device is selected should not be too strong. If it is too strong, it may not be able to see the picture on the screen. The light (such as windows) that may be injected near the screen should be blocked if necessary, and the lights should be turned off when the device is running to ensure the normal operation of the device. Do not install a light directly in front of the screen, just install a downlight.